Packages changed:
  grub2 (2.02 -> 2.04)
  hwdata (0.330 -> 0.331)
  kernel-firmware (20191118 -> 20200107)
  podman (1.6.4 -> 1.7.0)
  transactional-update (2.20 -> 2.20.1)

=== Details ===

==== grub2 ====
Version update (2.02 -> 2.04)
Subpackages: grub2-arm64-efi grub2-snapper-plugin

- Correct awk pattern in 20_linux_xen (bsc#900418, bsc#1157912)
- Correct linux and initrd handling in 20_linux_xen (bsc#1157912)
  M grub2-efi-xen-cfg-unquote.patch
  M grub2-efi-xen-chainload.patch
  M grub2-efi-xen-cmdline.patch
  M grub2-efi-xen-removable.patch
- Disable btrfs zstd support for i386-pc to workaround core.img too large to be
  embedded in btrfs bootloader area or MBR gap (boo#1154809)
  * 0001-btrfs-disable-zstd-support-for-i386-pc.patch
- Fix grub2.sleep to load old kernel after hibernation (boo#1154783)
- Enable support for riscv64
- Backports from upstream:
  * risc-v-fix-computation-of-pc-relative-relocation-offset.patch
  * risc-v-add-clzdi2-symbol.patch
  * grub-install-define-default-platform-for-risc-v.patch
- Version bump to 2.04
  * removed
  - translations-20170427.tar.xz
  * grub2.spec
  - Make signed grub-tpm.efi specific to x86_64-efi build, the platform
    currently shipped with tpm module from upstream codebase
  - Add shim_lock to signed grub.efi in x86_64-efi build
  - x86_64: linuxefi now depends on linux, both will verify kernel via
    shim_lock
  - Remove translation tarball and po file hacks as it's been included in
    upstream tarball
  * rediff
  - grub2-setup-try-fs-embed-if-mbr-gap-too-small.patch
  - grub2-commands-introduce-read_file-subcommand.patch
  - grub2-secureboot-add-linuxefi.patch
  - 0001-add-support-for-UEFI-network-protocols.patch
  - grub2-efi-HP-workaround.patch
  - grub2-secureboot-install-signed-grub.patch
  - grub2-linux.patch
  - use-grub2-as-a-package-name.patch
  - grub2-pass-corret-root-for-nfsroot.patch
  - grub2-secureboot-use-linuxefi-on-uefi.patch
  - grub2-secureboot-no-insmod-on-sb.patch
  - grub2-secureboot-provide-linuxefi-config.patch
  - grub2-secureboot-chainloader.patch
  - grub2-s390x-01-Changes-made-and-files-added-in-order-to-allow-s390x.patch
  - grub2-s390x-02-kexec-module-added-to-emu.patch
  - grub2-s390x-04-grub2-install.patch
  - grub2-btrfs-01-add-ability-to-boot-from-subvolumes.patch
  - grub2-efi-chainloader-root.patch
  - grub2-ppc64le-disable-video.patch
  - grub2-ppc64-cas-reboot-support.patch
  - grub2-Fix-incorrect-netmask-on-ppc64.patch
  - 0003-bootp-New-net_bootp6-command.patch
  - 0006-bootp-Add-processing-DHCPACK-packet-from-HTTP-Boot.patch
  - 0012-tpm-Build-tpm-as-module.patch
  - grub2-emu-4-all.patch
  - grub2-btrfs-09-get-default-subvolume.patch
  - grub2-ppc64le-memory-map.patch
  - grub2-ppc64-cas-fix-double-free.patch
  - 0008-efinet-Setting-DNS-server-from-UEFI-protocol.patch
  * drop upstream patches
  - grub2-fix-locale-en.mo.gz-not-found-error-message.patch
  - grub2-fix-build-with-flex-2.6.4.patch
  - grub2-accept-empty-module.patch
  - 0001-Fix-packed-not-aligned-error-on-GCC-8.patch
  - 0001-Fix-PCIe-LER-when-GRUB2-accesses-non-enabled-MMIO-da.patch
  - unix-exec-avoid-atexit-handlers-when-child-exits.patch
  - 0001-xfs-Accept-filesystem-with-sparse-inodes.patch
  - grub2-binutils2.31.patch
  - grub2-msdos-fix-overflow.patch
  - 0001-tsc-Change-default-tsc-calibration-method-to-pmtimer.patch
  - grub2-efi-Move-grub_reboot-into-kernel.patch
  - grub2-efi-Free-malloc-regions-on-exit.patch
  - grub2-move-initrd-upper.patch
  - 0002-Add-Virtual-LAN-support.patch
  - 0001-ofnet-Initialize-structs-in-bootpath-parser.patch
  - 0001-misc-fix-invalid-character-recongition-in-strto-l.patch
  - 0001-tpm-Core-TPM-support.patch
  - 0002-tpm-Measure-kernel-initrd.patch
  - 0003-tpm-Add-BIOS-boot-measurement.patch
  - 0004-tpm-Rework-linux-command.patch
  - 0005-tpm-Rework-linux16-command.patch
  - 0006-tpm-Measure-kernel-and-initrd-on-BIOS-systems.patch
  - 0007-tpm-Measure-the-kernel-commandline.patch
  - 0008-tpm-Measure-commands.patch
  - 0009-tpm-Measure-multiboot-images-and-modules.patch
  - 0010-tpm-Fix-boot-when-there-s-no-TPM.patch
  - 0011-tpm-Fix-build-error.patch
  - 0013-tpm-i386-pc-diskboot-img.patch
  - grub2-freetype-pkgconfig.patch
  - 0001-cpio-Disable-gcc9-Waddress-of-packed-member.patch
  - 0002-jfs-Disable-gcc9-Waddress-of-packed-member.patch
  - 0003-hfs-Fix-gcc9-error-Waddress-of-packed-member.patch
  - 0004-hfsplus-Fix-gcc9-error-with-Waddress-of-packed-membe.patch
  - 0005-acpi-Fix-gcc9-error-Waddress-of-packed-member.patch
  - 0006-usbtest-Disable-gcc9-Waddress-of-packed-member.patch
  - 0007-chainloader-Fix-gcc9-error-Waddress-of-packed-member.patch
  - 0008-efi-Fix-gcc9-error-Waddress-of-packed-member.patch
- Consistently find btrfs snapshots on s390x.  (bsc#1136970)
  * grub2-s390x-04-grub2-install.patch

==== hwdata ====
Version update (0.330 -> 0.331)

- Update to version 0.331:
  * Updated pci, usb and vendor ids.

==== kernel-firmware ====
Version update (20191118 -> 20200107)
Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network

- Update to version 20200107 (git commit 67d4ff59bf33):
  * Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714
  * radeon: update oland rlc microcode from amdgpu
  * amdgpu: update vega20 microcode for 19.50
  * amdgpu: update vega12 microcode for 19.50
  * amdgpu: update vega10 microcode for 19.50
  * amdgpu: update picasso microcode for 19.50
  * amdgpu: update raven2 microcode for 19.50
  * amdgpu: update raven microcode for 19.50
  * amdgpu: update navi10 microcode for 19.50
  * amdgpu: update navi14 microcode for 19.50
  * amdgpu: add TA microcode for Raven asics
  * qed: Add firmware 8.42.2.0
  * Adjust WHENCE entry to check_whence doesn't complain
  * qcom: Switch SDM845 WLAN firmware
  * linux-firmware: add NXP firmware licence file
- Update to version 20191220 (git commit 6871bffa79ed):
  * ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
  * ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070
  * ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047
  * ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070
  * ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047
  * ath10k: QCA6174 hw3.0: update board-2.bin
- Update to version 20191218 (git commit c4586ffaac0c):
  * linux-firmware: Update AMD cpu microcode
  * inside-secure: add new "mini" firmware for the EIP197 driver
  * WHENCE: Add raspberry-pi4 SDIO file
  * qcom: update venus firmware files for v5.4
  * cxgb4: Update firmware to revision 1.24.11.0
  * brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
  * qcom: Add SDM845 Compute DSP firmware
  * qcom: Add SDM845 Audio DSP firmware
  * qcom: Add SDM845 modem firmware
- Update topics and aliases for 5.5 kernels

==== podman ====
Version update (1.6.4 -> 1.7.0)

- Add: 0001-clarify-container-prune-force.patch to fix the --force
  flag for the "container prune" command.
  (https://github.com/containers/libpod/issues/4844)
- Update podman to v1.7.0
  * Features
  - Added support for setting a static MAC address for containers
  - Added support for creating macvlan networks with podman
    network create, allowing Podman containers to be attached
    directly to networks the host is connected to
  - The podman image prune and podman container prune commands
    now support the --filter flag to filter what will be pruned,
    and now prompts for confirmation when run without --force
    (#4410 and #4411)
  - Podman now creates CGroup namespaces by default on systems
    using CGroups v2 (#4363)
  - Added the podman system reset command to remove all Podman
    files and perform a factory reset of the Podman installation
  - Added the --history flag to podman images to display previous
    names used by images (#4566)
  - Added the --ignore flag to podman rm and podman stop to not
    error when requested containers no longer exist
  - Added the --cidfile flag to podman rm and podman stop to read
    the IDs of containers to be removed or stopped from a file
  - The podman play kube command now honors Seccomp annotations
    (#3111)
  - The podman play kube command now honors RunAsUser,
    RunAsGroup, and selinuxOptions
  - The output format of the podman version command has been
    changed to better match docker version when using the
  - -format flag
  - Rootless Podman will no longer initialize containers/storage
    twice, removing a potential deadlock preventing Podman
    commands from running while an image was being pulled (#4591)
  - Added tmpcopyup and notmpcopyup options to the --tmpfs and
  - -mount type=tmpfs flags to podman create and podman run to
    control whether the content of directories are copied into
    tmpfs filesystems mounted over them
  - Added support for disabling detaching from containers by
    setting empty detach keys via --detach-keys=""
  - The podman build command now supports the --pull and
  - -pull-never flags to control when images are pulled during a
    build
  - The podman ps -p command now shows the name of the pod as
    well as its ID (#4703)
  - The podman inspect command on containers will now display the
    command used to create the container
  - The podman info command now displays information on registry
    mirrors (#4553)
  * Bugfixes
  - Fixed a bug where Podman would use an incorrect runtime
    directory as root, causing state to be deleted after root
    logged out and making Podman in systemd services not function
    properly
  - Fixed a bug where the --change flag to podman import and
    podman commit was not being parsed properly in many cases
  - Fixed a bug where detach keys specified in libpod.conf were
    not used by the podman attach and podman exec commands, which
    always used the global default ctrl-p,ctrl-q key combination
    (#4556)
  - Fixed a bug where rootless Podman was not able to run podman
    pod stats even on CGroups v2 enabled systems (#4634)
  - Fixed a bug where rootless Podman would fail on kernels
    without the renameat2 syscall (#4570)
  - Fixed a bug where containers with chained network namespace
    dependencies (IE, container A using --net container=B and
    container B using --net container=C) would not properly mount
    /etc/hosts and /etc/resolv.conf into the container (#4626)
  - Fixed a bug where podman run with the --rm flag and without
  - d could, when run in the background, throw a 'container does
    not exist' error when attempting to remove the container
    after it exited
  - Fixed a bug where named volume locks were not properly
    reacquired after a reboot, potentially leading to deadlocks
    when trying to start containers using the volume (#4605 and
    [#4621])
  - Fixed a bug where Podman could not completely remove
    containers if sent SIGKILL during removal, leaving the
    container name unusable without the podman rm --storage
    command to complete removal (#3906)
  - Fixed a bug where checkpointing containers started with --rm
    was allowed when --export was not specified (the container,
    and checkpoint, would be removed after checkpointing was
    complete by --rm) (#3774)
  - Fixed a bug where the podman pod prune command would fail if
    containers were present in the pods and the --force flag was
    not passed (#4346)
  - Fixed a bug where containers could not set a static IP or
    static MAC address if they joined a non-default CNI network
    (#4500)
  - Fixed a bug where podman system renumber would always throw
    an error if a container was mounted when it was run
  - Fixed a bug where podman container restore would fail with
    containers using a user namespace
  - Fixed a bug where rootless Podman would attempt to use the
    journald events backend even on systems without systemd
    installed
  - Fixed a bug where podman history would sometimes not properly
    identify the IDs of layers in an image (#3359)
  - Fixed a bug where containers could not be restarted when
    Conmon v2.0.3 or later was used
  - Fixed a bug where Podman did not check image OS and
    Architecture against the host when starting a container
  - Fixed a bug where containers in pods did not function
    properly with the Kata OCI runtime (#4353)
  - Fixed a bug where `podman info --format '{{ json . }}' would
    not produce JSON output (#4391)
  - Fixed a bug where Podman would not verify if files passed to
  - -authfile existed (#4328)
  - Fixed a bug where podman images --digest would not always
    print digests when they were available
  - Fixed a bug where rootless podman run could hang due to a
    race with reading and writing events
  - Fixed a bug where rootless Podman would print warning-level
    logs despite not be instructed to do so (#4456)
  - Fixed a bug where podman pull would attempt to fetch from
    remote registries when pulling an unqualified image using the
    docker-daemon transport (#4434)
  - Fixed a bug where podman cp would not work if STDIN was a
    pipe
  - Fixed a bug where podman exec could stop accepting input if
    anything was typed between the command being run and the exec
    session starting (#4397)
  - Fixed a bug where podman logs --tail 0 would print all lines
    of a container's logs, instead of no lines (#4396)
  - Fixed a bug where the timeout for slirp4netns was incorrectly
    set, resulting in an extremely long timeout (#4344)
  - Fixed a bug where the podman stats command would print CPU
    utilizations figures incorrectly (#4409)
  - Fixed a bug where the podman inspect --size command would not
    print the size of the container's read/write layer if the
    size was 0 (#4744)
  - Fixed a bug where the podman kill command was not properly
    validating signals before use (#4746)
  - Fixed a bug where the --quiet and --format flags to podman ps
    could not be used at the same time
  - Fixed a bug where the podman stop command was not stopping
    exec sessions when a container was created without a PID
    namespace (--pid=host)
  - Fixed a bug where the podman pod rm --force command was not
    removing anonymous volumes for containers that were removed
  - Fixed a bug where the podman checkpoint command would not
    export all changes to the root filesystem of the container if
    performed more than once on the same container (#4606)
  - Fixed a bug where containers started with --rm would not be
    automatically removed on being stopped if an exec session was
    running inside the container (#4666)
  * Misc
  - The fixes to runtime directory path as root can cause strange
    behavior if an upgrade is performed while containers are
    running
  - Updated vendored Buildah to v1.12.0
  - Updated vendored containers/storage library to v1.15.4
  - Updated vendored containers/image library to v5.1.0
  - Kata Containers runtimes (kata-runtime, kata-qemu, and
    kata-fc) are now present in the default libpod.conf, but will
    not be available unless Kata containers is installed on the
    system
  - Podman previously did not allow the creation of containers
    with a memory limit lower than 4MB. This restriction has been
    removed, as the crun runtime can create containers with
    significantly less memory
- Remove no longer needed workaround for *.5.md man page sources

==== transactional-update ====
Version update (2.20 -> 2.20.1)

- Update to version 2.20.1
  - Add missing documentation about --continue option
  - Avoid error message about missing fstab file on first snapshot creation.
    [boo#1160213]